digitalSTROM is very easy to use in new buildings as well as in existing buildings, because the digitalSTROM system communicates via existing power lines. To use digitalSTROM, it is therefore just necessary to equip the desired devices, appliances and push-buttons with digitalSTROM terminal blocks and to upgrade the fuse box. For every terminal block to be installed, phase and neutral (L, N) must be provided. Further information can be found on our website.
Example of a room in a new building: Provide 230 V lines (L N) wherever possible, e. g. for a ceiling light always make sure to provide L and N, too. The same applies for electric radiator and shutter cables.
For further information please refer to the Planner manual on our Website.