digitalSTROM Support
- Total activity 493
- Last activity
- Member since
- Following 0 users
- Followed by 4 users
- Votes 0
- Subscriptions 255
Articles
Recent activity by digitalSTROM Support Sort by recent activity-
What does the cabling look like if I have several sub-distributions in a single-family house?
The following points must be observed during installation: Install the dSM's and dSF in each sub-distribution. Install a dSS in one of these sub-distributions (only one dSS per house/apartment). C...
-
Can other deviced be linked to the dS-485 bus?
No, because dS-485 is a digitalSTROM proprietary protocol. To access digitalSTROM, please use the JSON interface.
-
Which cable do you recommend according to VDE 0100-444 for the dS485 bus?
We recommend to use non-shielded twisted paired cables, preferably with 0.8 mm diameter, due to the mechanical stability.
-
What is the maximum cable length for a dS485 bus?
The maximum cable lenght for a dS485 bus is 100 m.
-
How are the dSMs and the dSS connected?
dSMs and dSS are connected via a 2-wire bus on which the dS485 protocol runs.
-
Do all inputs have to be assigned to the terminal block?
No, unconnected inputs must be isolated and should be marked as 'reserve' or 'available' or something like that in the configurator.
-
What are area push-buttons intended for?
Area push-buttons allow new design options for lighting. An area comprises one or more luminaires in a room, which can be switched independently from the room.
-
What is the difference between device/room/area push-buttons?
The device push-button only controls the local device with a single click. In the case of multiple clicks, it behaves like the room push-button. Device push-buttons also function without dSM in a n...
-
How can I add additional functionality in an installation?
digitalSTROM can be adapted and expanded according to your wishes. Additional digitalSTROM -Server Apps can be used to easily install new functionalities.
-
How can I access the server to program it?
To program the server, make sure that PC and the digitalSTROM server are in the same network. There are two options: Either PC and server are linked to each other via a router or via a network cabl...