digitalSTROM Support
- Total activity 492
- Last activity
- Member since
- Following 0 users
- Followed by 4 users
- Votes 0
- Subscriptions 255
Articles
Recent activity by digitalSTROM Support Sort by recent activity-
Can I use DALI luminaires within a digitalSTROM system?
Yes. To integrate Dali liminaires into your digitalSTROM system, you need the digitalSTROM Bridge (P44-DSB-DEH2). A single P44-DSB-DEH2 device connects up to 64 dimmable DALI lights, many wireless ...
-
Can I integrate Philips Hue into a digitalSTROM system?
Yes. There are two options: A so-called digitalSTROM-Bridge is used for access including the dimming function. And for simple cases there is a Server-App available.
-
Can I also use radio for devices or sensors without power connection?
Yes. In these cases, a so-called digitalSTROM bridge designed by „Plan44“ is used. This is an interface to be used with EnOcean sensors and actuators from third-party manufacturers, such as Philips...
-
Does digitalSTROM offer a driver with 10V input?
Yes, digitalSTROM offers the universal module GE-UMV200.
-
How can I use LED strips with digitalSTROM?
It is recommended to use a driver with a 1-10V input and a GE-UMV200. If RGB(W) is to be dimmed, pleaase use a 3 or 4 channel driver. Attention: When using single drivers, there is almost always a...
-
How can LEDs be used?
Depending on the power, the GE-KM200 or GE-KL200 should be used. The GE-KM200 can be used up to a load of 150W, the GE-KL200 up to a load of 1400W. Attention: for inductive loads, the GE-KL200 must...
-
How can fluorescent lamps (FL) be used?
GE-KL200 should be used to do so.
-
How is it possible to use energy saving lamps (ESL)?
Depending on the performance, GE-KM200 or GE-KL200 should be used. The GE-KM200 can be used for loads up to 150 W, the GE-KL200 is suitable for loads up to 1400 W. Attention: For inductive loads a ...
-
How can I use low-voltage halogen lights?
Depending on the power and the electronic transformers, GE-KM2 or GE-KL200 should be used. GE-KM200 is suitable for loads up to 150 W; GE-KL200 should be used for loads up to 1400 W. Attention: F...
-
How can I use high voltage halogen lamps?
Depending on the performance GE-KM200 or GE-KL200 should be used. For loads up to 150 W the GE-KM200 is suitable, for loads up to 1400 W the GE-KL200 must to be used. Attention: For inductive loa...